Tutorials

Port-Channel LACP configuration (Cisco IOS)

1- Configure interfaces in order be part of a channel group:

switch# configure terminal
switch(config)# interface fastethernet 0/1-2
switch(config-if)# channel-group 5 mode active
switch(config-if)# no shudown

Interface Gi0/1 & Gi0/2 will join interface port-channel 5 with LACP as negociation protocol.


2- Configure interface port-channel :

switch# configure terminal
switch(config)# interface port-channel 5
switch(config-if)# switchport mode trunk
switch(config-if)# switchport trunk allowed vlan 1-200
switch(config-if)# no shudown

Related Articles

Back to top button
error: Content is protected !!