BGP MED Configuration [Gns3 Lab]
Lets configure BGP and change the MED for each destination: * R2 configuration: We will prefer the 4.
Lets configure BGP and change the MED for each destination: * R2 configuration: We will prefer the 4.
Topology: R1 Config: R2 Config: Verification: Show ip bgp neighbor: Show ip BGP Show ip route:
Topology: S1 config: (VTP server) S2 config: (VTP client) to verify , show vtp status PS: all interfa
* Topology: * Configuration: R1 configuration: R2 configuration: R3 configuration: R4 configuration:
Topology: Configuration of each node: Router1: Router 2 Configuration: Router 3 Configuration: Router
Topology: Rules to implement: Restrict traffic internally using Router1 as follows: – Use acces
Topology: TACACS protcol configuration: Tacacs server configuration: R1 AAA Tacas configuration: Inte
1) Configure the router to get an IP address via DHCP from your ISP: Router(config)#int gi0/0/1 Route
Topology: Basic configuration, Interface addresses and static routing: R1 interface addresses configu