L2VPN VPLS Configuration Example Step by Step [Cisco CSR]

VPLS provides a full mesh multi-point to multi-point layer 2 networks.

Topology

MPLS Initial setup Configuration

CSR1 Configuration:

interface Loopback0
 ip address 1.1.1.1 255.255.255.255
!
interface GigabitEthernet1
 ip address 10.10.1.1 255.255.255.252
 negotiation auto
 mpls ip

!
interface GigabitEthernet2
 ip address 10.10.2.1 255.255.255.252
 negotiation auto
 mpls ip

!
router ospf 1
 router-id 1.1.1.1
 network 1.1.1.1 0.0.0.0 area 0
 network 10.10.1.0 0.0.0.3 area 0
 network 10.10.2.0 0.0.0.3 area 0

CSR2 Configuration:


interface Loopback0
 ip address 2.2.2.2 255.255.255.255
!
interface GigabitEthernet1
 ip address 10.10.1.2 255.255.255.252
 negotiation auto
 mpls ip

!
interface GigabitEthernet2
 ip address 10.10.3.1 255.255.255.252
 negotiation auto
 mpls ip

!
router ospf 1
 router-id 2.2.2.2
 network 2.2.2.2 0.0.0.0 area 0
 network 10.10.1.0 0.0.0.3 area 0
 network 10.10.3.0 0.0.0.3 area 0

CSR3 Configuration:


interface Loopback0
 ip address 3.3.3.3 255.255.255.255
!
interface GigabitEthernet1
 ip address 10.10.3.2 255.255.255.252
 negotiation auto
 mpls ip
 no mop enabled
 no mop sysid
!
interface GigabitEthernet2
 ip address 10.10.2.2 255.255.255.252
 negotiation auto
 mpls ip
 no mop enabled
 no mop sysid
!
router ospf 1
 router-id 3.3.3.3
 network 3.3.3.3 0.0.0.0 area 0
 network 10.10.2.0 0.0.0.3 area 0
 network 10.10.3.0 0.0.0.3 area 0



VPLS Configuration

On CSR-1:

l2 vfi CustomerA manual
 vpn id 111
 bridge-domain 10
 neighbor 2.2.2.2 encapsulation mpls
 neighbor 3.3.3.3 encapsulation mpls


interface GigabitEthernet3
 no ip address
 negotiation auto
 service instance 10 ethernet
  encapsulation dot1q 110
  bridge-domain 10


On CSR-2:

l2 vfi CustomerA manual
 vpn id 111
 bridge-domain 10
 neighbor 3.3.3.3 encapsulation mpls
 neighbor 1.1.1.1 encapsulation mpls

interface GigabitEthernet3
 no ip address
 negotiation auto
 service instance 10 ethernet
  encapsulation dot1q 110
  bridge-domain 10

On CSR-3:

l2 vfi CustomerA manual
 vpn id 111
 bridge-domain 10
 neighbor 2.2.2.2 encapsulation mpls
 neighbor 1.1.1.1 encapsulation mpls


interface GigabitEthernet3
 no ip address
 negotiation auto
 service instance 10 ethernet
  encapsulation dot1q 110
  bridge-domain 10


VPLS Verifications

Bilel Ameur

Enthusiastic Network Engineer specializing in Cisco ACI, passionate about solving challenges. A lifelong learner who loves gaining and sharing knowledge. Profile: https://www.linkedin.com/in/bilel-ameur-71116b2b5
0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x